top of page
pump_finder_top_banner.jpg

PUMP FINDER

Related Information

​

Product Information

​

Ask About Our Product

​

What else can I do?

​

Read reviews and testimonial

​

Order our product

​

Email this to a friend

img_review.gif
icon_emailfriend.gif
icon_cart.gif
phone%20call%20icon_edited.png
icon_info.gif

Hover here for more

Step 1 and Step 2 -  Select fields to narrow down your search.

​

Subsequently, under the Recommended Pump Type, click on the displayed pump model and scroll below to view pump details.  You may select 2 or more pump types to compare details. 

​

Step 3 -  Finally, you may click on Pump Sizing to input your required pump performance parameters, which will display the selected best efficiency pump models that will meet your performance requirements. 

​

Each pump model displayed has an          icon at the right end, that when clicked will enable a download (or right-click to display a new tab) of the Pump Data Sheet           showing the model’s pump performance curve and other specific information. The         icon is to send enquiry to our customer service for the specific pump model selected.

 

Alternatively, if you would like to view our full list of products, please visit our product information section that also display parts list, catalogs, general dimensions, etc.

PDF download 25.png
Pump Type
Model
Speed (rpm)
Imp. Size (mm)

Step 1: 

Industry

Chemical/Liquid Processing

Chemical/Liquid Processing

Edible Oils - Refinery, Oleo Chemical, Bulking Plant

Edible Oils - Refinery, Oleo Chemical, Bulking Plant

General Industries

General Industries

Palm Oil Mills

Palm Oil Mills

Pulp & Papers

Pulp & Papers

Sugar Mills

Sugar Mills

Step 2 :

Pump Application

Chemicals

Chemicals

Drainage

Drainage

Effluent / Sludge

Effluent / Sludge

Metering

Metering

Sewage

Sewage

Thermal Oil

Thermal Oil

Water / Clean Liquid

Water / Clean Liquid

Recommended

Pump Type

KS-SG2

KS-SR

KS-SE3

KS-TO

KDP

Step 3: 

Pump Sizing

Pump Model Quick Sizing

To Advance Sizing Mode

m

m³/hr

Rated Capacity input field has invalid data : Value must be more than 0

Insufficient information.  Please enter all required information.

System Head input field has invalid data : Value must be more than 0

Pump Sizing

No suitable pump model found. Please contact us for assistance.

Pump Type
Model
Speed (rpm)
Imp. Size (mm)
Capacity (m³/hr)
Head (m)
NPSHR (m)
Power Absorbed (HP)
Pump Efficiency (%)

Generate Pump Data Sheet

Send

Enquiry

to us

KSSG2.jpg

KS-SG2

Chemical Process Pump

Design:
Horizontal, long-coupled, single-stage stainless steel centrifugal pump with centerline discharge volute casing, overhung impeller, replaceable shaft-protecting sleeve and end suction in back pull-out design.  Available in 37 pump sizes with 4 different sizes of support.

​

Complies with ISO 2858:1975 (dimensions and performance), ISO 5199:2002 (design and construction), ISO 7005-1:1992–PN16 (flanges dimensions and drilling), DIN 24960 (mechanical seal dimensions) and ISO3661:1977 (baseplate dimensions).

​

Suitable for:
Liquids with low viscosity, clean or slightly contaminate, chemically inert or aggressive, and free from solid particles.
 
Fields of Application:
Chemical and petrochemical industry, automobile, mechanical and general engineering industries, food and beverage industry, pharmaceutical industry, paint industry, palm oil industry, plastic and rubber industry, iron and non-ferrous metal industry, paper and chemical wood pulp industries, textile industry, building and construction industry, thermo-electric power station, environmental and wastewater technology, refinery systems, heating and air conditioning, drainage, water supply, condensate transport, swimming pools, irrigation, fire-fighting water, oil, brine and others.

​

Technical Data:

​

​

​

​

​

​

​

​

​

 

 

 

 

 

 

​​

Discharge Size:

32 mm to 150 mm

Flow Rate:

up to 650 m³/hr

Head:

up to 150 m

Speed:

max. 3,600 rpm

Working Temperature:

max. 180 °C

Casing Pressure:

up to 16 bar

Shaft Seal:

Standard - Single Acting Mechanical Seal

Optional - Double Acting Mechanical Seal, Cartridge Mechanical Seal, Gland Packing

Wetted Parts Material:

Standard - Stainless Steel 316 (CF-8M)

Optional - Stainless Steel 304 (CF-8), Cast Iron, Alloy 20. CD4MCu

Advantages:

  • Large hydraulic field of applications 

  • Standard radial, closed impeller for good efficiency

  • Easy and safe maintenance through the back pull-out design

  • Heavy duty design with long bearing life expectancy

  • Shaft not in contact with pumped liquid and is protected by shaft sleeve

  • Available with jacketed pump casing and stuffing box cover, closed or open type impeller, bearing frame with oversized oil bath cooling and different variations of sealing arrangements to meet all kind of applications

  • Shaft with greatest possible diameters, to achieved low shaft deflection by operational radial forces

​​

KSSR.JPG

KS-SR

General Application Pump

Design:

Horizontal, long (SR models) and close-coupled (SRM models), single-stage stainless steel centrifugal pump with centerline discharge volute casing, overhung impeller and end suction in back pull-out design.  Available in 37 pump sizes with 4 different sizes of support.

 

Complies with ISO 2858:1975 (dimensions and performance), ISO 7005-1:1992–PN16 (flanges dimensions and drilling) and ISO3661:1977 (baseplate dimensions).

​

Suitable for:
Liquids with low viscosity, clean or slightly contaminate and free from solid particles.
 
Fields of Application:

Automobile, mechanical and general engineering industries, food and beverage industry, pharmaceutical industry, paint industry, palm oil industry, plastic and rubber industry, iron and non-ferrous metal industry, paper and pulp industry, textile industry, building and construction industry, heating and air conditioning, drainage, water supply, condensate transport, swimming pools, irrigation, fire-fighting water, oil, brine and etc.

​

Technical Data:

 

 

 

 

​

​

Discharge Size:

32 mm to 200 mm

Flow Rate:

up to 700 m³/hr

Head:

up to 150 m

Speed:

max. 3,600 rpm

Working Temperature:

max. 120 °C

Casing Pressure:

up to 16 bar

Wetted Parts Material:

Standard - Stainless Steel 304 (CF-8)

Optional - Stainless Steel 316 (CF-8M), Cast Iron

Shaft Seal:

Standard - Single Acting Mechanical Seal

Optional - Gland Packing

Advantages:

  • Large hydraulic field of applications

  • Standard radial, closed impeller for good efficiency

  • Easy and safe maintenance through the back pull-out design

  • Available in close-coupled design (SRM) to minimize space required for installation

  • Robust and stiff solid stainless steel shaft to achieve low shaft deflection by operational radial forces

​

​

KSSE3_edited.jpg

KS-SE3

Solid Handing Pump

Design:

Horizontal, long-coupled, single-stage stainless steel centrifugal pump with tangential discharge concentric casing, overhung impeller and end suction in back pull-out design.  Available in 12 pump sizes with 2 different sizes of support.

 

Flange dimensions and drilling according to ISO 2084–PN16.

​

Suitable for:
Liquids containing suspended matter or solids of all sorts.
 
Fields of Application:

Sewage plants (storm water, pre-filtered sewage, industrial effluents), chemical plants (chemical effluents, brines and lies, milk of lime, crystal sludge, filter material, plastic suspensions), palm oil mills (effluents, sludge, crude palm oil, claybath system), rolling mills (scale-contaminated water from steel and copper rolling mills), foundries and iron and steel works (effluents and sludge from dust and arrester plants), construction industry (mixtures of water and cement and water from excavation ditches), paper and cellulose paper industry (chemical pulp and mechanical pulp, suspensions up to 6% absolutely dry), sugar mills (carbonation juice, concentrated juice, milk of lime), food industry (thick mash, fruit and potato slices) and etc.

​

Technical Data:

​

​

​

​

​

​

​

​

​

 

 

 

 

​​

Discharge Size:

40 mm to 100 mm

Flow Rate:

up to 400 m³/hr

Head:

up to 100 m

Speed:

max. 2,900 rpm

Working Temperature:

max. 120 °C

Casing Pressure:

up to 16 bar

Wetted Parts Material:

Standard - Stainless Steel CA15

Optional - Stainless Steel 304 (CF-8), Cast Iron

Shaft Seal:

Standard - Single Acting Mechanical Seal

Optional - Lip Sealing, Dynamic Sealing, Gland Packing

Advantages:

  • Only one type of bearing and power end, two types of shaft and seal for all sizes of pump, thus reduces parts inventories, saves capital and storage space

  • Concentric casing with tangential discharge, reduce turbulence and cavitation, significant extended casing life especially in abrasive service

  • Self-priming pump models are available under this series of pumps which are able to operate without requiring the piping being primed with liquid..  These employ just a different pump casing attached to the same back-end of the KS-SE3  models

  • Standard non-clogging semi-open impeller, ideal for handling liquids containing suspended matter or solids

  • Large impeller diameter design to achieve high head with low running speed, thus reduces parts wear and tear rate

  • Clearance adjusting screws make open impeller running clearance adjustment easy and accurate to extend pump performance life

  • Design with dynamic sealing for tough pumping services like paper stock and slurries, where external seal water is not required

  • Easy and safe maintenance through the back pull-out design

​

​

KSTO2.jpg

KS-TO

Thermal Oil Pump

Design:

Horizontal, long coupled, single-stage centrifugal pump with centerline discharge volute casing, overhung impeller and end suction in back pull-out design.  Available in 19 pump sizes with 3 different sizes of support.

 

Complies with ISO 2858:1975 (dimensions and performance), ISO 7005-1:1992–PN16 (flanges dimensions and drilling) and ISO3661:1977 (baseplate dimensions).

​

Suitable for:
Mineral and synthetic heat transfer oils with high temperature, weak corrosive and free from solid particles.
 
Fields of Application:

Chemical industry (heating of agitators, reactors, drying plants, polymerisation plants, plants for conveying high-viscous products and producing plastic materials and synthetic fibres), rubber and plastic industry (heating of calendars, melting pots, power presses for plastics, automatic injection  moulding machines, production of PVC adhesive tape), food industry (heating of baking and fish-frying ovens, distillation of fatty acids and glycerine, fat softening plants, production of potato chips and milk powder), paper industry and laundries (calendar rolls, production of corrugated cardboard, heating of washing machines, mangles and dryers), wood industry, asphalt/tar industry, soap/detergents industry, community heating, hydrocarbons preparation and etc.

​

Technical Data:

​

​

​

​

​

​

​

​

​

 

 

​

​

Discharge Size:

32 mm to 125 mm

Flow Rate:

up to 600 m³/hr

Head:

up to 100 m

Speed:

max. 2,900 rpm

Working Temperature:

max. 350 °C

Casing Pressure:

up to 16 bar

Wetted Parts Material:

Ductile Iron (Casing and Stuffing Box Cover), Cast Iron (Impeller), Stainless Steel 304 (CF-8) (Shaft)

Shaft Seal:

Single Acting Mechanical Seal

Advantages:

  • Large hydraulic field of applications

  • Radial, closed impeller for good efficiency

  • Easy and safe maintenance through the back pull-out design

  • Cooling of shaft sealing is not required

  • Combination of carbon sleeve bearing and anti-friction ball bearing gives noiseless operation and long service life

KDP.JPG

KDP

Dosing Pump

Design:

Simplex or duplex, positive displacement, reciprocating piston pump with adjustable flow.

​

Suitable for:
Low to highly viscous, chemically inert or aggressive liquids.
 
Fields of Application:

Sewage and environmental engineering, chemical and petrochemical industries, food and beverages industry, paper and pulp industry, palm oil industry, soap and fats industry, dye and paint industry, plastic and ceramics industry and etc.

​

Technical Data:

​

​

​

​

​

​

​

​

​

 

​

​

Connections:

½” BSP

Shaft Seal:

V-packing Set

Wetted Parts Material:

Stainless Steel 304 (CF-8)

Maximum Capacity:

Simplex - 30 L/hr

Duplex - 60 L/hr

Maximum Pressure:

35 kg/cm2

Maximum Suction Lift:

3 m for Water

Working Temperature:

max. 100 °C

Advantages:

  • Available in simplex, or duplex for multi chemical feed

  • Output adjustable from zero to maximum capacity

  • Completely self priming

  • Double ball valve action for ease of priming

  • Eccentric assembly has lifetime lubricated components

​

​

bottom of page